Mechanical
Adjustability | Fixed |
---|---|
Body Material | Zinc Annealed Steel |
Diffuser Material | PMMA |
Product Finish | Powdercoated |
Fitting Colour | White |
IC Rating | Do not cover |
Installation Type | Recessed |
IP Rating | IP20 |
Electrical
Electrical Rating | Class II |
---|---|
Input Frequency | 50 Hz |
Input voltage | 230Vac |
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% | |
Switch Type | Inline |
Working Temp Range | -20 to 40 °C |
Lamp
CCT Configuration | Single |
---|---|
Colour Rendering Index (CRI) | >95 |
LED Lifetime
LED Lifetime | >54000 hrs | ||||||
---|---|---|---|---|---|---|---|
This is the Reported LED Lifetime in Hours based on TM-21. Harcroft does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. | |||||||
LED Lifetime Ratings (Failure rate & lumen depreciation) | |||||||
| |||||||
This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. | |||||||
TM-21 Test Hours | 9000 hrs |
Compliance
Product Design Life | 10 years |
---|---|
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. | |
Daily Use | 12 hrs |
The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally. | |
Standards |
|
Warranty
Commercial Use Warranty | |
---|---|
BLJ1__-______________CD BLJ1__-______________CE BLJ1__-______________CF BLJ1__-______________CG BLJ1__-______________CH BLJ1__-______________CI BLJ1__-______________CJ BLJ1__-______________CK BLJ1__-______________CL BLJ1__-______________CM BLJ1__-______________CN BLJ1__-______________CO BLJ1__-______________CP BLJ1__-______________CR BLJ1__-______________D3 BLJ1__-______________D4 BLJ1__-______________DI BLJ1__-______________DJ | 10 RTB (Total 10 Years) Control gear & LEDs. 5 Year for body |
BLJ1__-______________CC | 5 RTB (Total 5 Years) |
10 Year Return to base warranty on the Control Gear and LEDs which is subject to the hours of operation and use. All other components are covered by a return to base 3 year workmanship and defect warranty. | |
Warranty Operating Hours | |
BLJ1__-______________CC | 40000 hrs |
BLJ1__-______________CD BLJ1__-______________CE BLJ1__-______________CF BLJ1__-______________CG BLJ1__-______________CH BLJ1__-______________CI BLJ1__-______________CJ BLJ1__-______________CK BLJ1__-______________CL BLJ1__-______________CM BLJ1__-______________CN BLJ1__-______________CO BLJ1__-______________CP BLJ1__-______________CR BLJ1__-______________D3 BLJ1__-______________D4 BLJ1__-______________DI BLJ1__-______________DJ | 44000 hrs |
This product is provided with a warranty up until the stated warranty period or until the stated warranty operating hours has been reached (whichever occurs first). |